PartsTable
Technical Data Sheet
Download PDF

E-74114PC69 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

E-74114PC69: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_length: 0.609 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fastener_length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, locking_feature: PATCH OR PELLET OR STRIP THREADS, thread_direction: RIGHT-HAND, internal_drive_style: HEXAGON. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-081-5041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E-74114PC69
NSN: 5305-01-081-5041
FSC: 5305 — Screws
CAGE: 52374 — FLOWSERVE CORP DBA AUTOMAX ACTUATORS DIV FLOWSERVE US COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_length0.609 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
internal_drive_styleHEXAGON
special_test_featuresSPECIAL QUALITY CONTROL TESTING
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
material_document_and_classificationMIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5305-01-081-5041
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: E-74114PC69 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
THREAD LENGTH: 0.609 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
THREAD LENGTH0.609 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
INTERNAL DRIVE STYLEHEXAGON
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD QUANTITY PER INCH18
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
LO1485Reference document
Same NSN cross-reference
Reference document — Secondary reference
HCA-5/16-18X12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy E-74114PC69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E-74114PC69?
E-74114PC69 is a SCREW,CAP,SOCKET HEAD.
What parts can replace E-74114PC69?
There are 2 known substitutes for E-74114PC69: LO1485, HCA-5/16-18X12. Substitute compatibility should be verified for your specific system.
What is the NSN for E-74114PC69?
E-74114PC69 is cataloged in the U.S. Government catalog under NSN 5305-01-081-5041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E-74114PC69

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.