PartsTable
Technical Data Sheet
PartsTable / MRO / E-7
E-7 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include phase: SINGLE, diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC ETHYL CELLULOSE OR CELLULOSE ACETATE OVERALL, pipe_size: 0.750 INCHES NOMINAL IN, unit_type: STRAIGHT, body_style: UNSHIELDED, SOLID POST, TAPERED SEAT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ E-7
NSN: 3110-00-100-8516
FSC: 3110
CAGE: 00658 — ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY (USA)
SPECIFICATIONS
phaseSINGLE
diameter0.203 INCHES NOMINAL IN
materialPLASTIC ETHYL CELLULOSE OR CELLULOSE ACETATE OVERALL
quantity1
pipe_size0.750 INCHES NOMINAL IN
unit_typeSTRAIGHT
body_styleUNSHIELDED, SOLID POST, TAPERED SEAT
body_width1.000 INCHES NOMINAL IN
bore_shapeSTRAIGHT
screw_size0.750 INCHES NOMINAL IN
body_height1.375 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
NSN3110-00-100-8516
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 0.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE, BANDED OD
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER0.8750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
ALIGNMENT TYPERIGID
SPECIAL FEATURESBANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.8438 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
5602-160309Interchangeable
interchangeable cross-reference
interchangeable
801-601Interchangeable
interchangeable cross-reference
interchangeable
160909Interchangeable
interchangeable cross-reference
interchangeable
A2307Interchangeable
interchangeable cross-reference
interchangeable
9151282Interchangeable
interchangeable cross-reference
interchangeable
799-0104-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E-7?
E-7 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace E-7?
There are 18 known substitutes for E-7: 5602-160309, 801-601, 160909 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E-7?
E-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026