PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E-4515 ITEM 11
E-4515 ITEM 11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CORK SHEET is a the manufacturer industrial component. Key specifications include width: 12.000 INCHES NOMINAL IN, length: 36.000 INCHES NOMINAL IN, material: CORK, thickness: 0.062 INCHES NOMINAL IN, special_features: CORK SHEET IS MFG I/A/W ASTM F104 ID F215000M1RW, minimum_tensile_strength: ERR-060. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E-4515 ITEM 11
NSN: 5330-00-178-9792
FSC: 5330
CAGE: 07524 — DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC DBA BLACKMER DIV BLACKMER (USA)
SPECIFICATIONS
width12.000 INCHES NOMINAL IN
length36.000 INCHES NOMINAL IN
materialCORK
thickness0.062 INCHES NOMINAL IN
special_featuresCORK SHEET IS MFG I/A/W ASTM F104 ID F215000M1RW
minimum_tensile_strengthERR-060
NSN5330-00-178-9792
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E-4515 ITEM 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 12.000 INCHES NOMINAL IN
•
LENGTH: 36.000 INCHES NOMINAL IN
•
MATERIAL: CORK
•
THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH12.000 INCHES NOMINAL IN
LENGTH36.000 INCHES NOMINAL IN
WIDTH12.000 INCHES NOMINAL IN
MATERIALCORK
LENGTH36.000 INCHES NOMINAL IN
THICKNESS0.062 INCHES NOMINAL IN
SPECIAL FEATURESCORK SHEET IS MFG I/A/W ASTM F104 ID F215000M1RW
SPECIAL FEATURESCORK SHEET IS MFG I/A/W ASTM F104 ID F215000M1RW
THICKNESS0.062 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
PO001636553Interchangeable
interchangeable cross-reference
interchangeable
021-904826Interchangeable
interchangeable cross-reference
interchangeable
LO1146Interchangeable
interchangeable cross-reference
interchangeable
EL904-826Interchangeable
interchangeable cross-reference
interchangeable
904826Interchangeable
interchangeable cross-reference
interchangeable
HHC576TYPE1BCLASS2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E-4515 ITEM 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E-4515 ITEM 11?
E-4515 ITEM 11 is a CORK SHEET.
What parts can replace E-4515 ITEM 11?
There are 24 known substitutes for E-4515 ITEM 11: PO001636553, 021-904826, LO1146 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E-4515 ITEM 11?
E-4515 ITEM 11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E-4515 ITEM 11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026