PartsTable
Technical Data Sheet
Download PDF

DX599W — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DX599W: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.484 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-3029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DX599W
NSN: 5310-00-010-3029
FSC: 5310 — Nuts and Washers
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.484 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.875 INCHES NOMINAL IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch18
nondefinitive_spec/std_dataA TYPE
material_document_and_classificationQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-010-3029
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DX599W · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.484 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.875 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.484 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH18
SUBSTITUTES & CROSS-REFERENCES 5
103029Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB571TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
F5485Reference document
Same NSN cross-reference
Reference document — Secondary reference
N12311KReference document
Same NSN cross-reference
Reference document — Secondary reference
85481Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy DX599W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DX599W?
DX599W is a NUT,PLAIN,HEXAGON.
What parts can replace DX599W?
There are 5 known substitutes for DX599W: 103029, FFB571TYPEA, F5485 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DX599W?
DX599W is cataloged in the U.S. Government catalog under NSN 5310-00-010-3029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DX599W

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.