PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DX232
DX232 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES SHANK END, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN, first_end_outer_radius: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-198-5975, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DX232
NSN: 5315-00-198-5975
FSC: 5315
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES SHANK END
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
pin_size_designation3
first_end_outer_radius0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-198-5975
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DX232 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
•
FIRST END OUTER RADIUS: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
PIN SIZE DESIGNATION: 3
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END STYLE: OVAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE FINISH63.0 MICROINCHES SHANK END
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
FIRST END OUTER RADIUS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
PIN SIZE DESIGNATION3
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END STYLEOVAL
FIRST END LOCATIONBOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
4454AInterchangeable
interchangeable cross-reference
interchangeable
4454Interchangeable
interchangeable cross-reference
interchangeable
TM1-4 470Interchangeable
interchangeable cross-reference
interchangeable
TM1-4-470-10PCTInterchangeable
interchangeable cross-reference
interchangeable
TM1-4-500-10PCTInterchangeable
interchangeable cross-reference
interchangeable
X5-4 XYLENES 4 LITER BOTTLEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DX232?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DX232?
DX232 is a PIN,TAPERED,PLAIN.
What parts can replace DX232?
There are 27 known substitutes for DX232: 4454A, 4454, TM1-4 470 and 24 more. Substitute compatibility should be verified for your specific system.
Is DX232 still available?
DX232 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DX232

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026