PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DX213A
DX213A ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, material: STEEL COMP 1008 OVERALL, point_type: STANDARD, style_designator: STANDARD, underloop_length: 1.500 INCHES NOMINAL IN, nondefinitive_spec/std_data: B TYPE AND 4 CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DX213A
NSN: 5315-00-010-3376
FSC: 5315
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
diameter0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OVERALL
point_typeSTANDARD
style_designatorSTANDARD
underloop_length1.500 INCHES NOMINAL IN
nondefinitive_spec/std_dataB TYPE AND 4 CLASS
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-010-3376
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DX213A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 4 CLASS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1008 OVERALL
•
POINT TYPE: STANDARD
•
UNDERLOOP LENGTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
NONDEFINITIVE SPEC/STD DATAB TYPE AND 4 CLASS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1008 OVERALL
POINT TYPESTANDARD
UNDERLOOP LENGTH1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
934395Interchangeable
interchangeable cross-reference
interchangeable
5084Interchangeable
interchangeable cross-reference
interchangeable
103376Interchangeable
interchangeable cross-reference
interchangeable
SCD5448ITEM15Interchangeable
interchangeable cross-reference
interchangeable
5801Interchangeable
interchangeable cross-reference
interchangeable
XND16X7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DX213A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DX213A?
DX213A is a PIN,COTTER.
What parts can replace DX213A?
There are 18 known substitutes for DX213A: 934395, 5084, 103376 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DX213A?
DX213A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DX213A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026