PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DWG35719PT29935
DWG35719PT29935 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, hardness_rating: 84.0 ROCKWELL B NOMINAL OVERALL, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 0.750 INCHES NOMINAL IN, pin_overall_diameter: 0.1880 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-200-6287, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DWG35719PT29935
NSN: 5315-00-200-6287
FSC: 5315
CAGE: 32242 — JOHNSON CONTROLS, INC DIV BUILDING EFFICIENCY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
first_end_styleCHAMFERED
hardness_rating84.0 ROCKWELL B NOMINAL OVERALL
surface_treatmentPASSIVATE OVERALL
pin_overall_length0.750 INCHES NOMINAL IN
pin_overall_diameter0.1880 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-200-6287
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DWG35719PT29935 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.1880 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 84.0 ROCKWELL B NOMINAL OVERALL
•
PIN OVERALL LENGTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.1880 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING84.0 ROCKWELL B NOMINAL OVERALL
PIN OVERALL LENGTH0.750 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
22935Interchangeable
interchangeable cross-reference
interchangeable
229235Interchangeable
interchangeable cross-reference
interchangeable
7518-14Interchangeable
interchangeable cross-reference
interchangeable
755002A7654-14Interchangeable
interchangeable cross-reference
interchangeable
71982Interchangeable
interchangeable cross-reference
interchangeable
4042Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DWG35719PT29935?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DWG35719PT29935?
DWG35719PT29935 is a PIN,STRAIGHT,HEADLESS.
What parts can replace DWG35719PT29935?
There are 7 known substitutes for DWG35719PT29935: 22935, 229235, 7518-14 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DWG35719PT29935?
DWG35719PT29935 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-200-6287. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DWG35719PT29935

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026