PartsTable
Technical Data Sheet
Download PDF

DW4K2FS464 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

DW4K2FS464: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, load_direction: ANGULAR, inner_ring_width: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, outer_ring_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, style_designator: DOUBLE ROW. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-010-2481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DW4K2FS464
NSN: 3110-01-010-2481
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
seal_quantity2
load_directionANGULAR
inner_ring_width0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
outer_ring_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
style_designatorDOUBLE ROW
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
NSN3110-01-010-2481
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DW4K2FS464 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: DOUBLE ROW
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
STYLE DESIGNATORDOUBLE ROW
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6440 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE BALL
OVERALL OUTSIDE DIAMETER0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
SUBSTITUTES & CROSS-REFERENCES 3
MS27647-4AReference document
Same NSN cross-reference
Reference document — Secondary reference
AS27647Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
10107434Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy DW4K2FS464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DW4K2FS464?
DW4K2FS464 is a BEARING,BALL,AIRFRAME.
What parts can replace DW4K2FS464?
There are 3 known substitutes for DW4K2FS464: MS27647-4A, AS27647, 10107434. Substitute compatibility should be verified for your specific system.
What is the NSN for DW4K2FS464?
DW4K2FS464 is cataloged in the U.S. Government catalog under NSN 3110-01-010-2481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DW4K2FS464