PartsTable / COMPONENT / DW346
DW346
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The LOCK SET,RIM is a the manufacturer industrial component. Key specifications include bolt_type: REGULAR BEVEL, thickness: 1.375 INCHES MINIMUM AND 2.000 INCHES MAXIMUM DOOR IN, knob_shape: ROUND, operation_method: OUTSIDE KEY AND KNOB ON INSIDE LATCH BOLT, locking_mechanism_type: PIN TUMBLER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-7014, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
DW346
NSN: 5340-00-664-7014 FSC: 5340 CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
bolt_type REGULAR BEVEL thickness 1.375 INCHES MINIMUM AND 2.000 INCHES MAXIMUM DOOR IN knob_shape ROUND knob_quantity 1 operation_method OUTSIDE KEY AND KNOB ON INSIDE LATCH BOLT locking_mechanism_type PIN TUMBLER NSN 5340-00-664-7014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: DW346
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OPERATION METHOD: OUTSIDE KEY AND KNOB ON INSIDE LATCH BOLT
• THICKNESS: 1.375 INCHES MINIMUM AND 2.000 INCHES MAXIMUM DOOR IN
• LOCKING MECHANISM TYPE: PIN TUMBLER
TECHNICAL CHARACTERISTICS (FLIS)
BOLT TYPE REGULAR BEVEL OPERATION METHOD OUTSIDE KEY AND KNOB ON INSIDE LATCH BOLT THICKNESS 1.375 INCHES MINIMUM AND 2.000 INCHES MAXIMUM DOOR IN SPECIAL FEATURES SURFACE MOUNTED DEADLOCKING LATCHBOLT LOCK, METAL ALLOY MATERIAL SURFACE TREATMENT IAW MFG'S STANDARD FINISH REQUIREMENTS, COMPONENT AND QTY: 1 CYLINDER, 2 KEYS, 1 STRIKE; KEYWAY INCLUDED, PLAIN KNOB DESIGN, BACKSET DEPTH IS 2.375IN. NOMINAL, UNLIMITED KEY CHANGE QUANTITY, MASTER KEY PROVISION IS NOT INCLUDED, FURNISHED MOUNTING HARDWARE IS SCREWS IN KNOB QUANTITY 1 LOCKING MECHANISM TYPE PIN TUMBLER KNOB SHAPE ROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
6T6K X USA Upgraded Successor successor cross-reference
successor
FF-H-1819 Upgraded Successor successor cross-reference
successor
940 Upgraded Successor successor cross-reference
successor
A-A-1932 Interchangeable interchangeable cross-reference
interchangeable
A156.5 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy DW346?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DW346?
DW346 is a LOCK SET,RIM.
What parts can replace DW346?
There are 9 known substitutes for DW346: 6T6K X USA, FF-H-1819, 940 and 6 more. Substitute compatibility should be verified for your specific system.
Is DW346 still available?
DW346 is currently cancelled.