PartsTable
Technical Data Sheet
Download PDF

DV308-300-4 — GRIP,HANDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DV308-300-4: GRIP,HANDLE.

The GRIP,HANDLE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_length: 4.7500 INCHES NOMINAL IN, inside_diameter: 0.875 INCHES NOMINAL IN, mounting_method: PRESS FIT, outside_diameter: 1.1560 INCHES NOMINAL IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-487-2732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DV308-300-4
NSN: 5340-00-487-2732
FSC: 5340 — Hardware, Commercial
CAGE: 11201 — DEVAL LIFE CYCLE SUPPORT LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_length4.7500 INCHES NOMINAL IN
inside_diameter0.875 INCHES NOMINAL IN
mounting_methodPRESS FIT
outside_diameter1.1560 INCHES NOMINAL IN
style_designatorCYLINDRICAL
gripping_surface_conditionGRIP AID
NSN5340-00-487-2732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DV308-300-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: PRESS FIT
•
STYLE DESIGNATOR: CYLINDRICAL
•
OUTSIDE DIAMETER: 1.1560 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
GRIPPING SURFACE CONDITION: GRIP AID
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING METHODPRESS FIT
STYLE DESIGNATORCYLINDRICAL
OVERALL LENGTH4.7500 INCHES NOMINAL IN
OUTSIDE DIAMETER1.1560 INCHES NOMINAL IN
INSIDE DIAMETER0.875 INCHES NOMINAL IN
GRIPPING SURFACE CONDITIONGRIP AID
MATERIALRUBBER SYNTHETIC OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DV308-300-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DV308-300-4?
DV308-300-4 is a GRIP,HANDLE.
What is the NSN for DV308-300-4?
DV308-300-4 is cataloged in the U.S. Government catalog under NSN 5340-00-487-2732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DV308-300-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.