PartsTable
Technical Data Sheet

DUPLEXII/M0DEL 50 — STRAINER,SEDIMENT

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

DUPLEXII/M0DEL 50: STRAINER,SEDIMENT.

The STRAINER,SEDIMENT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, body_width: 45.000 INCHES NOMINAL IN, body_height: 50.625 INCHES NOMINAL IN, temp_rating: 75.0 FAHRENHEIT NOMINAL DEGF, operating_pressure: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS, perforation_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-196-9174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DUPLEXII/M0DEL 50
NSN: 4730-01-196-9174
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 73124 — HAYWARDINDL. PRODUCTS, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
body_width45.000 INCHES NOMINAL IN
body_height50.625 INCHES NOMINAL IN
temp_rating75.0 FAHRENHEIT NOMINAL DEGF
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
perforation_diameter0.250 INCHES NOMINAL IN
perforation_quantity8.0 PER SQUARE INCH
filtering_media_designPERFORATED SINGLE FILTERING MEDIA RESPONSE
media_for_which_designedFUEL/OIL, HYDROCARBON AND GAS AND WATER
first_intake_connection_typePLAIN FACE FLANGE CENTER
material_document_and_classificationMIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE FILTERING MEDIUM
first_discharge_connection_relationship_to_intake_connectionIDENTICAL TO FIRST INTAKE CONNECTION
NSN4730-01-196-9174
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: DUPLEXII/M0DEL 50 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FILTERING MEDIA DESIGN: PERFORATED SINGLE FILTERING MEDIA RESPONSE
•
TEMP RATING: 75.0 FAHRENHEIT NOMINAL DEGF
•
BODY WIDTH: 45.000 INCHES NOMINAL IN
•
BODY HEIGHT: 50.625 INCHES NOMINAL IN
•
FIRST INTAKE CONNECTION TYPE: PLAIN FACE FLANGE CENTER
•
PERFORATION QUANTITY: 8.0 PER SQUARE INCH
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE FILTERING MEDIUM
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
TECHNICAL CHARACTERISTICS
FILTERING MEDIA DESIGNPERFORATED SINGLE FILTERING MEDIA RESPONSE
TEMP RATING75.0 FAHRENHEIT NOMINAL DEGF
BODY WIDTH45.000 INCHES NOMINAL IN
BODY HEIGHT50.625 INCHES NOMINAL IN
FIRST INTAKE CONNECTION TYPEPLAIN FACE FLANGE CENTER
PERFORATION QUANTITY8.0 PER SQUARE INCH
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE FILTERING MEDIUM
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTIONIDENTICAL TO FIRST INTAKE CONNECTION
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND GAS AND WATER
SUBSTITUTES & CROSS-REFERENCES 4
ST050080BFMMMReference document
Same NSN cross-reference
Reference document — Secondary reference
ST0500800F11CAReference document
Same NSN cross-reference
Reference document — Secondary reference
ST050080BFM018/.250 BSKT PERFReference document
Same NSN cross-reference
Reference document — Secondary reference
ST524CNKXXSPECSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DUPLEXII/M0DEL 50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DUPLEXII/M0DEL 50?
DUPLEXII/M0DEL 50 is a STRAINER,SEDIMENT.
What parts can replace DUPLEXII/M0DEL 50?
There are 4 known substitutes for DUPLEXII/M0DEL 50: ST050080BFMMM, ST0500800F11CA, ST050080BFM018/.250 BSKT PERF and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DUPLEXII/M0DEL 50?
DUPLEXII/M0DEL 50 is cataloged in the U.S. Government catalog under NSN 4730-01-196-9174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DUPLEXII/M0DEL 50

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.