PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DT3
DT3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: IRON, gear_type: WORM, gear_ratio: 30 TO 1, peripheral_diameter: 0.562 INCHES NOMINAL IN, center_hole_diameter: 0.438 INCHES NOMINAL IN, cross-sectional_height: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-1414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DT3
NSN: 5330-01-043-1414
FSC: 5330
CAGE: 33559 — KIENE DIESEL ACCESSORIES, INC. DBA CONTINENTAL CUTOFF MACHINE (USA)
SPECIFICATIONS
materialIRON
gear_typeWORM
gear_ratio30 TO 1
peripheral_diameter0.562 INCHES NOMINAL IN
center_hole_diameter0.438 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
end_item_identificationSTRATEGIC SEALIFT CONVERSION SHIPS CLASS
valve_size_for_which_designed5.000 INCHES IN
valve_type_for_which_designedBUTTERFLY
NSN5330-01-043-1414
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DT3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.562 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.438 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.562 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.438 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
SK-114013 INDEX 25Interchangeable
interchangeable cross-reference
interchangeable
B-291 5IN-6INInterchangeable
interchangeable cross-reference
interchangeable
J022584Interchangeable
interchangeable cross-reference
interchangeable
33-2204Interchangeable
interchangeable cross-reference
interchangeable
DT3-33-2204Interchangeable
interchangeable cross-reference
interchangeable
DT3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DT3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DT3?
DT3 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace DT3?
There are 6 known substitutes for DT3: SK-114013 INDEX 25, B-291 5IN-6IN, J022584 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DT3?
DT3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-1414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DT3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026