PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / DT11
DT11 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

FILTER ELEMENT,INTAKE AIR CLEANE. Key specifications include material: RUBBER SYNTHETIC, special_features: FIXED ALARM TEMPERATURE 135.0 DEGF; PLUG-IN DETECTOR; SHOCK AND CORROS ION RESISTANT DEGF, cross-sectional_height: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-225-4052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ DT11
NSN: 7025-01-225-4052
FSC: 7025
CAGE: 15782 — BAUSCH AND LOMB INC GRAPHICS AND CONTROLS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
special_featuresFIXED ALARM TEMPERATURE 135.0 DEGF; PLUG-IN DETECTOR; SHOCK AND CORROS ION RESISTANT DEGF
cross-sectional_height0.062 INCHES NOMINAL IN
general_characteristics_item_description11 IN. BY 11 IN. DIGITIZING AREA; 1.0 IN. H; 17.0 IN. W; 14.0 IN. D; 5 LBS; 110-120 VAC; 60 HZ; 5 WATTS; SINGLE-BUTTON CURSOR VAC
NSN7025-01-225-4052
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K DT11 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN DT11 MFR OEM
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 11 IN. BY 11 IN. DIGITIZING AREA; 1.0 IN. H; 17.0 IN. W; 14.0 IN. D; 5 LBS; 110-120 VAC; 60 HZ; 5 WATTS; SINGLE-BUTTON CURSOR VAC
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTION11 IN. BY 11 IN. DIGITIZING AREA; 1.0 IN. H; 17.0 IN. W; 14.0 IN. D; 5 LBS; 110-120 VAC; 60 HZ; 5 WATTS; SINGLE-BUTTON CURSOR VAC
GENERAL CHARACTERISTICS ITEM DESCRIPTION11 IN. BY 11 IN. DIGITIZING AREA; 1.0 IN. H; 17.0 IN. W; 14.0 IN. D; 5 LBS; 110-120 VAC; 60 HZ; 5 WATTS; SINGLE-BUTTON CURSOR VAC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AF-383Interchangeable
interchangeable cross-reference
interchangeable
PA-614Interchangeable
interchangeable cross-reference
interchangeable
PMH-52Interchangeable
interchangeable cross-reference
interchangeable
DT11Interchangeable
interchangeable cross-reference
interchangeable
500-695430Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy DT11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DT11?
DT11 is a FILTER ELEMENT,INTAKE AIR CLEANE. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace DT11?
There are 5 known substitutes for DT11: AF-383, PA-614, PMH-52 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DT11?
DT11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-225-4052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DT11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026