PartsTable
Technical Data Sheet
Download PDF

DSS1010 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DSS1010: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: IRREGULAR, width: 1.00 INCHES NOMINAL IN, length: 2.00 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075, TYPE 6, thickness: 0.18 INCHES NOMINAL IN, surface_treatment: NICKEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-696-8850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DSS1010
NSN: 5340-01-696-8850
FSC: 5340 — Hardware, Commercial
CAGE: 62KD1 — DIGITIZED SCHEMATIC SOLUTIONS LLC (USA)
SPECIFICATIONS
shapeIRREGULAR
width1.00 INCHES NOMINAL IN
length2.00 INCHES NOMINAL IN
materialALUMINUM ALLOY 7075, TYPE 6
thickness0.18 INCHES NOMINAL IN
special_features6-32 UNC TAP THRU;MATERIAL ALUM 7075-T6;FINISH:ELECTROLESS NICKEL PLATE TO AMS-C-26074D,GRADE B,CLASS 3,0.0005 TO 0.001 INCH THICK IN
surface_treatmentNICKEL
end_item_identification1385-01-691-1871
part_name_assigned_by_controlling_agencyPLATE
NSN5340-01-696-8850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DSS1010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.00 INCHES NOMINAL IN
•
SHAPE: IRREGULAR
•
SURFACE TREATMENT: NICKEL
•
WIDTH: 1.00 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 7075, TYPE 6
TECHNICAL CHARACTERISTICS
LENGTH2.00 INCHES NOMINAL IN
SHAPEIRREGULAR
SPECIAL FEATURES6-32 UNC TAP THRU;MATERIAL ALUM 7075-T6;FINISH:ELECTROLESS NICKEL PLATE TO AMS-C-26074D,GRADE B,CLASS 3,0.0005 TO 0.001 INCH THICK IN
SURFACE TREATMENTNICKEL
WIDTH1.00 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLATE
END ITEM IDENTIFICATION1385-01-691-1871
MATERIALALUMINUM ALLOY 7075, TYPE 6
THICKNESS0.18 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DSS1010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DSS1010?
DSS1010 is a PLATE,MOUNTING.
What is the NSN for DSS1010?
DSS1010 is cataloged in the U.S. Government catalog under NSN 5340-01-696-8850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DSS1010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.