PartsTable
Technical Data Sheet
Download PDF

DSC7900-12-D-6.5 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

DSC7900-12-D-6.5: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 FASTENER, head_style: KNURLED NO. 2, head_height: 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.467 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN, thread_length: 0.267 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-333-6410, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DSC7900-12-D-6.5
NSN: 5305-01-333-6410
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 FASTENER
head_styleKNURLED NO. 2
head_height0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.467 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN
thread_length0.267 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
fastener_length1.293 INCHES MINIMUM AND 1.323 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE SECONDARY WASHER
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
NSN5305-01-333-6410
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DSC7900-12-D-6.5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.293 INCHES MINIMUM AND 1.323 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
•
MATERIAL ACCOMMODATED THICKNESS: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FASTENER LENGTH1.293 INCHES MINIMUM AND 1.323 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
MATERIAL ACCOMMODATED THICKNESS0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.267 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
841581-107Reference document
Same NSN cross-reference
Reference document — Secondary reference
841581-0107Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FT1046-107AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DSC7900-12-D-6.5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DSC7900-12-D-6.5?
DSC7900-12-D-6.5 is a SCREW ASSEMBLY,PANEL.
What parts can replace DSC7900-12-D-6.5?
There are 3 known substitutes for DSC7900-12-D-6.5: 841581-107, 841581-0107, FT1046-107A. Substitute compatibility should be verified for your specific system.
What is the NSN for DSC7900-12-D-6.5?
DSC7900-12-D-6.5 is cataloged in the U.S. Government catalog under NSN 5305-01-333-6410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DSC7900-12-D-6.5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.