PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS10FED
DS10FED ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SHIELD, bore_diameter: 0.6250 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, inner_ring_width: 1.1250 INCHES NOMINAL IN, outer_ring_width: 0.9370 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS10FED
NSN: 3110-00-142-4496
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SHIELD
bore_diameter0.6250 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
shield_quantity2
inner_ring_width1.1250 INCHES NOMINAL IN
outer_ring_width0.9370 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
lubrication_materialGREASE
overall_outside_diameter1.9375 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-142-4496
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DS10FED · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.9375 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
INNER RING WIDTH: 1.1250 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.9370 INCHES NOMINAL IN
•
ALIGNMENT TYPE: SELF-ALIGNING
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL CORROSION RESISTING SHIELD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.9375 INCHES NOMINAL IN
SHIELD QUANTITY2
INNER RING WIDTH1.1250 INCHES NOMINAL IN
OUTER RING WIDTH0.9370 INCHES NOMINAL IN
ALIGNMENT TYPESELF-ALIGNING
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL CORROSION RESISTING SHIELD
SURFACE TREATMENTCADMIUM OVERALL
BORE DIAMETER0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1/OFInterchangeable
interchangeable cross-reference
interchangeable
SBC2/OS-LInterchangeable
interchangeable cross-reference
interchangeable
DS-10-1500GInterchangeable
interchangeable cross-reference
interchangeable
DS-10Interchangeable
interchangeable cross-reference
interchangeable
10Interchangeable
interchangeable cross-reference
interchangeable
TS-5169/PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS10FED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS10FED?
DS10FED is a BEARING,BALL,AIRFRAME.
What parts can replace DS10FED?
There are 9 known substitutes for DS10FED: 1/OF, SBC2/OS-L, DS-10-1500G and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS10FED?
DS10FED is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS10FED

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026