PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS-935338
DS-935338 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 OVERALL, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.1450 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN, overall_length: 1.3800 INCHES MINIMUM AND 1.4000 INCHES MAXIMUM IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-442-6264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-935338
NSN: 3120-00-442-6264
FSC: 3120
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 OVERALL
corner_shapeSQUARE OUTSIDE RIGHT CORNER
flange_width0.1450 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
overall_length1.3800 INCHES MINIMUM AND 1.4000 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
hardness_rating58.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.6877 INCHES MINIMUM AND 0.6879 INCHES MAXIMUM IN
body_outside_diameter0.8800 INCHES MINIMUM AND 0.8820 INCHES MAXIMUM IN
flange_outside_diameter1.1150 INCHES MINIMUM AND 1.1170 INCHES MAXIMUM IN
lubricant_accommodation_stylePERFORATED
material_document_and_classificationMIL-S-7097 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-442-6264
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: DS-935338 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
BODY INSIDE DIAMETER: 0.6877 INCHES MINIMUM AND 0.6879 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.8800 INCHES MINIMUM AND 0.8820 INCHES MAXIMUM IN
•
LUBRICANT ACCOMMODATION STYLE: PERFORATED
•
FLANGE WIDTH: 0.1450 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
•
FLANGE OUTSIDE DIAMETER: 1.1150 INCHES MINIMUM AND 1.1170 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE INSIDE RIGHT CORNER
OVERALL LENGTH1.3800 INCHES MINIMUM AND 1.4000 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.6877 INCHES MINIMUM AND 0.6879 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.8800 INCHES MINIMUM AND 0.8820 INCHES MAXIMUM IN
LUBRICANT ACCOMMODATION STYLEPERFORATED
FLANGE WIDTH0.1450 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
FLANGE OUTSIDE DIAMETER1.1150 INCHES MINIMUM AND 1.1170 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEROUND LEFT FLANGE OUTSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
2581Interchangeable
interchangeable cross-reference
interchangeable
BT2581Interchangeable
interchangeable cross-reference
interchangeable
V1610Interchangeable
interchangeable cross-reference
interchangeable
111-046-0003Interchangeable
interchangeable cross-reference
interchangeable
5936Interchangeable
interchangeable cross-reference
interchangeable
7716676P22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-935338?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-935338?
DS-935338 is a BEARING,SLEEVE.
What parts can replace DS-935338?
There are 17 known substitutes for DS-935338: 2581, BT2581, V1610 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS-935338?
DS-935338 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-442-6264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-935338

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026