PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS-935206
DS-935206 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 2.219 INCHES NOMINAL IN, center_hole_diameter: 1.625 INCHES NOMINAL IN, cross-sectional_height: 0.230 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-400-5519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-935206
NSN: 5330-00-400-5519
FSC: 5330
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter2.219 INCHES NOMINAL IN
center_hole_diameter1.625 INCHES NOMINAL IN
cross-sectional_height0.230 INCHES NOMINAL IN
NSN5330-00-400-5519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS-935206 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.230 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PERIPHERAL DIAMETER: 2.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.230 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PERIPHERAL DIAMETER2.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FB-40405-7Interchangeable
interchangeable cross-reference
interchangeable
579-7Interchangeable
interchangeable cross-reference
interchangeable
FX37Interchangeable
interchangeable cross-reference
interchangeable
1504105Interchangeable
interchangeable cross-reference
interchangeable
A1504105Interchangeable
interchangeable cross-reference
interchangeable
935206Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-935206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-935206?
DS-935206 is a RETAINER,PACKING.
What parts can replace DS-935206?
There are 6 known substitutes for DS-935206: FB-40405-7, 579-7, FX37 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS-935206?
DS-935206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-400-5519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-935206

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026