PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS-934648
DS-934648 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.765 INCHES MAXIMUM IN, fastener_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-051-4136, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-934648
NSN: 5306-00-051-4136
FSC: 5306
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.765 INCHES MAXIMUM IN
fastener_length0.875 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
NSN5306-00-051-4136
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DS-934648 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
THREAD LENGTH: 0.765 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH170000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD LENGTH0.765 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
5472AInterchangeable
interchangeable cross-reference
interchangeable
5271Interchangeable
interchangeable cross-reference
interchangeable
527Interchangeable
interchangeable cross-reference
interchangeable
U5836FInterchangeable
interchangeable cross-reference
interchangeable
G5271Interchangeable
interchangeable cross-reference
interchangeable
62386Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-934648?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-934648?
DS-934648 is a BOLT,INTERNAL WRENCHING.
What parts can replace DS-934648?
There are 11 known substitutes for DS-934648: 5472A, 5271, 527 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS-934648?
DS-934648 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-051-4136. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-934648

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026