PartsTable
Technical Data Sheet
DS-934373 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL, overall_height: 0.203 INCHES NOMINAL IN, flange_thickness: 0.090 INCHES NOMINAL IN, special_features: END HOLE THD 0.164 NF-3B, end_hole_diameter: 0.136 INCHES NOMINAL IN, body_outside_diameter: 0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-013-3806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-934373
NSN: 5340-00-013-3806
FSC: 5340
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL
overall_height0.203 INCHES NOMINAL IN
flange_thickness0.090 INCHES NOMINAL IN
special_featuresEND HOLE THD 0.164 NF-3B
end_hole_diameter0.136 INCHES NOMINAL IN
body_outside_diameter0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
NSN5340-00-013-3806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS-934373 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASEHARDENING INDICATOR: NOT CASEHARDENED
END HOLE DIAMETER: 0.136 INCHES NOMINAL IN
MATERIAL: STEEL
BODY OUTSIDE DIAMETER: 0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
FLANGE THICKNESS: 0.090 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASEHARDENING INDICATORNOT CASEHARDENED
SPECIAL FEATURESEND HOLE THD 0.164 NF-3B
END HOLE DIAMETER0.136 INCHES NOMINAL IN
MATERIALSTEEL
BODY OUTSIDE DIAMETER0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
OVERALL HEIGHT0.203 INCHES NOMINAL IN
FLANGE THICKNESS0.090 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
PN-00007AUpgraded Successor
successor cross-reference
successor
4344SUpgraded Successor
successor cross-reference
successor
5134Upgraded Successor
successor cross-reference
successor
RD20Interchangeable
interchangeable cross-reference
interchangeable
M5-701AInterchangeable
interchangeable cross-reference
interchangeable
5-76Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-934373?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-934373?
DS-934373 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace DS-934373?
There are 15 known substitutes for DS-934373: PN-00007A, 4344S, 5134 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS-934373?
DS-934373 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-013-3806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-934373