PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS-930652
DS-930652 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, rim_surface_width: 0.035 INCHES NOMINAL IN, peripheral_diameter: 0.905 INCHES NOMINAL IN, center_hole_diameter: 0.676 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN, fsc_application_data: PUMP,HYDRAULIC,ACFT, cross-sectional_height: 0.245 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-332-6799, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-930652
NSN: 5330-00-332-6799
FSC: 5330
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
rim_surface_width0.035 INCHES NOMINAL IN
peripheral_diameter0.905 INCHES NOMINAL IN
center_hole_diameter0.676 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
fsc_application_dataPUMP,HYDRAULIC,ACFT
cross-sectional_height0.245 INCHES NOMINAL IN
flanged_body_outside_diameter0.905 INCHES NOMINAL IN
NSN5330-00-332-6799
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS-930652 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.245 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
PERIPHERAL DIAMETER: 0.905 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.035 INCHES NOMINAL IN
•
FSC APPLICATION DATA: PUMP,HYDRAULIC,ACFT
•
CENTER HOLE DIAMETER: 0.676 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
•
FLANGED BODY OUTSIDE DIAMETER: 0.905 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.245 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
PERIPHERAL DIAMETER0.905 INCHES NOMINAL IN
RIM SURFACE WIDTH0.035 INCHES NOMINAL IN
FSC APPLICATION DATAPUMP,HYDRAULIC,ACFT
CENTER HOLE DIAMETER0.676 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
FLANGED BODY OUTSIDE DIAMETER0.905 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
15-444Interchangeable
interchangeable cross-reference
interchangeable
94-415-1022-01-14-00Interchangeable
interchangeable cross-reference
interchangeable
10224864Interchangeable
interchangeable cross-reference
interchangeable
6667-0460Interchangeable
interchangeable cross-reference
interchangeable
H1Interchangeable
interchangeable cross-reference
interchangeable
571-3402-1303157PCSP55Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-930652?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-930652?
DS-930652 is a RETAINER,PACKING.
What parts can replace DS-930652?
There are 7 known substitutes for DS-930652: 15-444, 94-415-1022-01-14-00, 10224864 and 4 more. Substitute compatibility should be verified for your specific system.
Is DS-930652 still available?
DS-930652 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-930652

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026