PartsTable
Technical Data Sheet
PartsTable / MRO / DS-2
DS-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RECORDER-REPRODUCER,SOUND is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include bed_type: FIXED, material: PLASTIC ACETAL BODY, tailgate: NOT INCLUDED, top_bows: NOT INCLUDED, body_type: PANEL W/INTEGRAL SIDES AND FRONT PANEL, lens_type: STOVEPIPE, SHORT SHANK SINGLE LIGHT FIRST POSITION HORIZONTAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-224-0086, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ DS-2
NSN: 5330-00-224-0086
FSC: 5330
CAGE: 15472 — SOLVENTUM PURIFICATION INC. DIV FILTRATION AND SEPARATION DIVISION (USA)
SPECIFICATIONS
bed_typeFIXED
materialPLASTIC ACETAL BODY
tailgateNOT INCLUDED
top_bowsNOT INCLUDED
body_typePANEL W/INTEGRAL SIDES AND FRONT PANEL
lens_typeSTOVEPIPE, SHORT SHANK SINGLE LIGHT FIRST POSITION HORIZONTAL
tarpaulinNOT INCLUDED
lens_colorWHITE SINGLE LIGHT FIRST POSITION HORIZONTAL
design_typeWHEELED
temp_rating212.0 FAHRENHEIT DEGF
support_typeADJUSTABLE LEG
hole_diameter0.210 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-224-0086
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 2.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.688 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.210 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT: RUBBER SYNTHETIC OVERALL
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
TEMP RATING: 212.0 FAHRENHEIT DEGF
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER2.188 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.688 INCHES NOMINAL IN
HOLE DIAMETER0.210 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENTRUBBER SYNTHETIC OVERALL
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
TEMP RATING212.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER3.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
SM-A-949433-27Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-17813Interchangeable
interchangeable cross-reference
interchangeable
ME20200100001Interchangeable
interchangeable cross-reference
interchangeable
PM22214Interchangeable
interchangeable cross-reference
interchangeable
22214Interchangeable
interchangeable cross-reference
interchangeable
4024R1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-2?
DS-2 is a RECORDER-REPRODUCER,SOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace DS-2?
There are 19 known substitutes for DS-2: SM-A-949433-27, MIL-DTL-17813, ME20200100001 and 16 more. Substitute compatibility should be verified for your specific system.
Is DS-2 still available?
DS-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026