PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DR954147
DR954147 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 15.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.5670 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3471, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DR954147
NSN: 3110-00-156-3471
FSC: 3110
CAGE: 1ML14 — BRINKLEY TECHNOLOGY GROUP LLC DBA HERCULES MANUFACTURING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter15.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.5670 INCHES NOMINAL IN
outer_ring_width0.4330 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3471
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DR954147 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
INNER RING WIDTH: 0.5670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER35.00 MILLIMETERS NOMINAL MM
BORE DIAMETER15.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
INNER RING WIDTH0.5670 INCHES NOMINAL IN
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
6211Interchangeable
interchangeable cross-reference
interchangeable
103047Interchangeable
interchangeable cross-reference
interchangeable
1024FCInterchangeable
interchangeable cross-reference
interchangeable
X4-21Interchangeable
interchangeable cross-reference
interchangeable
005-300-0009Interchangeable
interchangeable cross-reference
interchangeable
18-3-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DR954147?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR954147?
DR954147 is a BEARING,BALL,ANNULAR.
What parts can replace DR954147?
There are 26 known substitutes for DR954147: 6211, 103047, 1024FC and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DR954147?
DR954147 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DR954147

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026