PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DR83393
DR83393 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.925 INCHES NOMINAL IN, fork_depth: 7.500 INCHES NOMINAL IN, overall_width: 1.700 INCHES NOMINAL IN, fork_span_width: 2.500 INCHES NOMINAL IN, overall_diameter: 1.380 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-398-8753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DR83393
NSN: 5340-00-398-8753
FSC: 5340
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.925 INCHES NOMINAL IN
fork_depth7.500 INCHES NOMINAL IN
overall_width1.700 INCHES NOMINAL IN
fork_span_width2.500 INCHES NOMINAL IN
overall_diameter1.380 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.750 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end12.475 INCHES NOMINAL IN
NSN5340-00-398-8753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DR83393 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 12.475 INCHES NOMINAL IN
•
END RADIUS: 0.925 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.750 INCHES NOMINAL IN
•
FORK DEPTH: 7.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FORK SPAN WIDTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIALSTEEL OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END12.475 INCHES NOMINAL IN
END RADIUS0.925 INCHES NOMINAL IN
FORK ARM THICKNESS0.750 INCHES NOMINAL IN
FORK DEPTH7.500 INCHES NOMINAL IN
OVERALL WIDTH1.700 INCHES NOMINAL IN
OVERALL DIAMETER1.380 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
S072-007688Interchangeable
interchangeable cross-reference
interchangeable
03-09-2021Interchangeable
interchangeable cross-reference
interchangeable
1545PInterchangeable
interchangeable cross-reference
interchangeable
988PInterchangeable
interchangeable cross-reference
interchangeable
2053PNInterchangeable
interchangeable cross-reference
interchangeable
714PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DR83393?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR83393?
DR83393 is a CLEVIS,ROD END.
What parts can replace DR83393?
There are 9 known substitutes for DR83393: S072-007688, 03-09-2021, 1545P and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DR83393?
DR83393 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-398-8753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DR83393

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026