PartsTable
Technical Data Sheet
Download PDF

DR736CC31-06-0081 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

DR736CC31-06-0081: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-346-0013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DR736CC31-06-0081
NSN: 4720-01-346-0013
FSC: 4720 — Hose and Flexible Tubing
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.400 INCHES NOMINAL IN
special_featuresEXTERNAL PROTECTION TYPE AND LOCATION- OVERALL CHAFE GUARD, TETRAFLUOROETHYLENE , INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE
thread_directionRIGHT-HAND FIRST END
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
NSN4720-01-346-0013
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: DR736CC31-06-0081 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 8.012 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING CADMIUM FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER BRAIDED STEEL WIRE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH8.012 INCHES NOMINAL OVERALL IN
TEMP RATING-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING CADMIUM FIRST END
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER BRAIDED STEEL WIRE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.400 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
SAE-AS604Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS627Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS627-06B0081Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
170X001-6CR0081Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS627-0680081Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DR736CC31-06-0081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR736CC31-06-0081?
DR736CC31-06-0081 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace DR736CC31-06-0081?
There are 5 known substitutes for DR736CC31-06-0081: SAE-AS604, AS627, AS627-06B0081 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DR736CC31-06-0081?
DR736CC31-06-0081 is cataloged in the U.S. Government catalog under NSN 4720-01-346-0013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DR736CC31-06-0081

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.