PartsTable
Technical Data Sheet
Download PDF

DR611SP — HANGER,PIPE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DR611SP: HANGER,PIPE.

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, style_designator: SOLID RING, surface_treatment: ANODIZE, pipe_accommodation_diameter: 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, supported_item_and_quantity: 1 PIPE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-390-5851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DR611SP
NSN: 5340-01-390-5851
FSC: 5340 — Hardware, Commercial
CAGE: 29964 — ALLIED DEVICES CORP DBA ABSOLUTE PRECISION CO (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
style_designatorSOLID RING
surface_treatmentANODIZE
pipe_accommodation_diameter0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
supported_item_and_quantity1 PIPE
surface_treatment_document_and_classificationMIL-A-8625, TYPE 1, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE
NSN5340-01-390-5851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DR611SP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 1, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE
•
STYLE DESIGNATOR: SOLID RING
•
SURFACE TREATMENT: ANODIZE
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
PIPE ACCOMMODATION DIAMETER: 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TYPE 1, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE
STYLE DESIGNATORSOLID RING
SURFACE TREATMENTANODIZE
SUPPORTED ITEM AND QUANTITY1 PIPE
PIPE ACCOMMODATION DIAMETER0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY
SUBSTITUTES & CROSS-REFERENCES 2
3113AS3610-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BC17-11CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DR611SP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR611SP?
DR611SP is a HANGER,PIPE.
What parts can replace DR611SP?
There are 2 known substitutes for DR611SP: 3113AS3610-1, BC17-11C. Substitute compatibility should be verified for your specific system.
What is the NSN for DR611SP?
DR611SP is cataloged in the U.S. Government catalog under NSN 5340-01-390-5851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DR611SP