PartsTable
Technical Data Sheet
Download PDF

DR4536-22 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DR4536-22: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 3.500 INCHES NOMINAL IN, height: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, extended_length: 43.000 INCHES NOMINAL IN, mounting_method: COUNTERSUNK HOLE, style_designator: 3 - MEMBER, mounting_facility_diameter: 0.177 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-375-2886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DR4536-22
NSN: 5340-01-375-2886
FSC: 5340 — Hardware, Commercial
CAGE: 83508 — HETTICH AMERICA, L.P. (USA)
SPECIFICATIONS
width3.500 INCHES NOMINAL IN
height0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
extended_length43.000 INCHES NOMINAL IN
mounting_methodCOUNTERSUNK HOLE
style_designator3 - MEMBER
mounting_facility_diameter0.177 INCHES NOMINAL IN
mounting_facility_quantity14
NSN5340-01-375-2886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DR4536-22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.177 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 14
•
EXTENDED LENGTH: 43.000 INCHES NOMINAL IN
•
MOUNTING METHOD: COUNTERSUNK HOLE
•
STYLE DESIGNATOR: 3 - MEMBER
•
HEIGHT: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
WIDTH: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.177 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY14
EXTENDED LENGTH43.000 INCHES NOMINAL IN
MOUNTING METHODCOUNTERSUNK HOLE
STYLE DESIGNATOR3 - MEMBER
HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
WIDTH3.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
900508-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DR4536-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR4536-22?
DR4536-22 is a SLIDE,DRAWER,EXTENSION.
What parts can replace DR4536-22?
There is 1 known substitute for DR4536-22: 900508-001. Substitute compatibility should be verified for your specific system.
What is the NSN for DR4536-22?
DR4536-22 is cataloged in the U.S. Government catalog under NSN 5340-01-375-2886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DR4536-22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.