PartsTable / COMPONENT / DR1912008
DR1912008
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.219 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.969 INCHES NOMINAL IN, bolt_circle_diameter: 1.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-7089, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
DR1912008
NSN: 5330-00-358-7089 FSC: 5330 CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
material PAPER OVERALL hole_diameter 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 2.219 INCHES NOMINAL IN style_designator NON-CIRCULAR aperture_diameter 0.969 INCHES NOMINAL IN bolt_hole_quantity 3 bolt_circle_diameter 1.031 INCHES NOMINAL IN outside_corner_radius 0.250 INCHES NOMINAL IN cross-sectional_thickness 0.016 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION side_radius_from_bolt_circle 1.454 INCHES NOMINAL IN NSN 5330-00-358-7089
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: DR1912008
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOLE DIAMETER: 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• APERTURE DIAMETER: 0.969 INCHES NOMINAL IN
• STYLE DESIGNATOR: NON-CIRCULAR
• SIDE RADIUS FROM BOLT CIRCLE: 1.454 INCHES NOMINAL IN
• CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY 3 HOLE DIAMETER 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL PAPER OVERALL APERTURE DIAMETER 0.969 INCHES NOMINAL IN OVERALL WIDTH 2.219 INCHES NOMINAL IN STYLE DESIGNATOR NON-CIRCULAR SIDE RADIUS FROM BOLT CIRCLE 1.454 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.016 INCHES NOMINAL IN OUTSIDE CORNER RADIUS 0.250 INCHES NOMINAL IN BOLT CIRCLE DIAMETER 1.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
34482 Interchangeable interchangeable cross-reference
interchangeable
1663-1 Interchangeable interchangeable cross-reference
interchangeable
853569 Interchangeable interchangeable cross-reference
interchangeable
LS3234-3 Interchangeable interchangeable cross-reference
interchangeable
13274 Interchangeable interchangeable cross-reference
interchangeable
734FF Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy DR1912008?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DR1912008?
DR1912008 is a GASKET.
What parts can replace DR1912008?
There are 21 known substitutes for DR1912008: 34482, 1663-1, 853569 and 18 more. Substitute compatibility should be verified for your specific system.
Is DR1912008 still available?
DR1912008 is currently cancelled.
Request a Quote — DR1912008