PartsTable
Technical Data Sheet
Download PDF

DPYS7900-6-F-35 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

DPYS7900-6-F-35: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 STAND-OFF, head_style: FLAT COUNTERSUNK, thread_class: 2A2A, head_diameter: 0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.323 INCHES MAXIMUM0.323 INCHES MAXIMUM IN, thread_length: 0.203 INCHES NOMINAL IN, fastener_length: 0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-237-9316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DPYS7900-6-F-35
NSN: 5305-01-237-9316
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 304 STAND-OFF
head_styleFLAT COUNTERSUNK
thread_class2A2A
head_diameter0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.323 INCHES MAXIMUM0.323 INCHES MAXIMUM IN
thread_length0.203 INCHES NOMINAL IN
fastener_length0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOTSLOT
nominal_thread_diameter0.138 INCHES IN
minimum_tensile_strength160000 POUNDS PER SQUARE INCH160000 POUNDS PER SQUARE INCH LBS
NSN5305-01-237-9316
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DPYS7900-6-F-35 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.203 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD LENGTH0.203 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DPYS7900-6-F-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DPYS7900-6-F-35?
DPYS7900-6-F-35 is a SCREW ASSEMBLY,PANEL.
What is the NSN for DPYS7900-6-F-35?
DPYS7900-6-F-35 is cataloged in the U.S. Government catalog under NSN 5305-01-237-9316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DPYS7900-6-F-35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.