PartsTable
Technical Data Sheet
Download PDF

DPQ7900-10-D-4.5 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

DPQ7900-10-D-4.5: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING FASTENER, head_style: FILLISTER, head_height: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_length: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-090-2916, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DPQ7900-10-D-4.5
NSN: 5305-01-090-2916
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FASTENER
head_styleFILLISTER
head_height0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_length0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
fastener_length0.763 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength180000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5305-01-090-2916
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DPQ7900-10-D-4.5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.763 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.393 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
FASTENER LENGTH0.763 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS0.393 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
THREAD LENGTH0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
582R195H69Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DPQ7900-10-D-4.5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DPQ7900-10-D-4.5?
DPQ7900-10-D-4.5 is a SCREW ASSEMBLY,PANEL.
What parts can replace DPQ7900-10-D-4.5?
There is 1 known substitute for DPQ7900-10-D-4.5: 582R195H69. Substitute compatibility should be verified for your specific system.
What is the NSN for DPQ7900-10-D-4.5?
DPQ7900-10-D-4.5 is cataloged in the U.S. Government catalog under NSN 5305-01-090-2916. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DPQ7900-10-D-4.5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.