PartsTable
Technical Data Sheet
Download PDF

DPKA-59-1325 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DPKA-59-1325: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 2.180 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN, special_features: COLOR RED, inside_diameter_length: 0.856 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, tube_outside_diameter_for_which_designed: 1.932 INCHES MINIMUM AND 1.952 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-255-4872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DPKA-59-1325
NSN: 5340-00-255-4872
FSC: 5340 — Hardware, Commercial
CAGE: 71468 — ITT CANNON LLC (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter2.180 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
special_featuresCOLOR RED
inside_diameter_length0.856 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
tube_outside_diameter_for_which_designed1.932 INCHES MINIMUM AND 1.952 INCHES MAXIMUM IN
NSN5340-00-255-4872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DPKA-59-1325 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 2.180 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.932 INCHES MINIMUM AND 1.952 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
INSIDE DIAMETER LENGTH: 0.856 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER2.180 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.932 INCHES MINIMUM AND 1.952 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR RED
MATERIALPLASTIC, POLYETHYLENE (PP)
INSIDE DIAMETER LENGTH0.856 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
DPKA59Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy DPKA-59-1325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DPKA-59-1325?
DPKA-59-1325 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace DPKA-59-1325?
There is 1 known substitute for DPKA-59-1325: DPKA59. Substitute compatibility should be verified for your specific system.
What is the NSN for DPKA-59-1325?
DPKA-59-1325 is cataloged in the U.S. Government catalog under NSN 5340-00-255-4872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DPKA-59-1325