DPF7930P-6-A-3 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

DPF7930P-6-A-3: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 FASTENER, head_style: PAN NO. 2, head_height: 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, thread_length: 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-210-7422, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DPF7930P-6-A-3

NSN: 5305-01-210-7422
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 302 FASTENER
head_style	PAN NO. 2
head_height	0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
thread_length	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
fastener_length	0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.138 INCHES IN
thread_quantity_per_inch	32
NSN	5305-01-210-7422

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL ACCOMMODATED THICKNESS: 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS5640 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
FASTENER LENGTH	0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS	0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
THREAD LENGTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5640 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	PAN NO. 2
THREAD DIRECTION	RIGHT-HAND

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 1

16611232-003Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy DPF7930P-6-A-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DPF7930P-6-A-3?

DPF7930P-6-A-3 is a SCREW ASSEMBLY,PANEL.

What parts can replace DPF7930P-6-A-3?

There is 1 known substitute for DPF7930P-6-A-3: 16611232-003. Substitute compatibility should be verified for your specific system.

What is the NSN for DPF7930P-6-A-3?

DPF7930P-6-A-3 is cataloged in the U.S. Government catalog under NSN 5305-01-210-7422. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DPF7930P-6-A-3 — SCREW ASSEMBLY,PANEL

Request a Quote — DPF7930P-6-A-3