PartsTable
Technical Data Sheet
Download PDF

DP8A3FS10132 — BEARING,BALL,TRACK ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

DP8A3FS10132: BEARING,BALL,TRACK ROLLER.

The BEARING,BALL,TRACK ROLLER is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, crown_radius: 0.5150 INCHES NOMINAL IN, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, inner_ring_width: 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, outer_ring_width: 0.5270 INCHES NOMINAL IN, special_features: INWARDLY CONVERGENT CONTACT ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-293-8323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DP8A3FS10132
NSN: 3110-00-293-8323
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
crown_radius0.5150 INCHES NOMINAL IN
bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
seal_quantity2
inner_ring_width0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
outer_ring_width0.5270 INCHES NOMINAL IN
special_featuresINWARDLY CONVERGENT CONTACT ANGLE
style_designatorDOUBLE ROW RIGID, CROWNED OD INNER RING ENTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.2200 INCHES MINIMUM AND 1.2250 INCHES MAXIMUM IN
NSN3110-00-293-8323
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DP8A3FS10132 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.5270 INCHES NOMINAL IN
•
CROWN RADIUS: 0.5150 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ROW RIGID, CROWNED OD INNER RING ENTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 1.2200 INCHES MINIMUM AND 1.2250 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.5270 INCHES NOMINAL IN
CROWN RADIUS0.5150 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ROW RIGID, CROWNED OD INNER RING ENTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER1.2200 INCHES MINIMUM AND 1.2250 INCHES MAXIMUM IN
SPECIAL FEATURESINWARDLY CONVERGENT CONTACT ANGLE
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
SEAL QUANTITY2
BORE DIAMETER0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
DP8A3ANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
DP8A3MILG3278Reference document
Same NSN cross-reference
Reference document — Secondary reference
DP8A3FS160Reference document
Same NSN cross-reference
Reference document — Secondary reference
DP8A3Reference document
Same NSN cross-reference
Reference document — Secondary reference
DP8A3FS10125Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DP8A3FS10132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DP8A3FS10132?
DP8A3FS10132 is a BEARING,BALL,TRACK ROLLER.
What parts can replace DP8A3FS10132?
There are 5 known substitutes for DP8A3FS10132: DP8A3ANG25, DP8A3MILG3278, DP8A3FS160 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DP8A3FS10132?
DP8A3FS10132 is cataloged in the U.S. Government catalog under NSN 3110-00-293-8323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DP8A3FS10132

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.