PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DP1176
DP1176 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: SQUARE, pin_overall_length: 4.5000 INCHES NOMINAL IN, first_hole_diameter: 0.188 INCHES NOMINAL IN, pin_overall_diameter: 0.7500 INCHES NOMINAL IN, second_hole_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-424-5964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DP1176
NSN: 5315-00-424-5964
FSC: 5315
CAGE: 00447 — WABCO CONSTRUCTION AND MINING EQUIPMENT GROUP INDIANAPOLIS PLANT AN AMERICAN STANDARD INC CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleSQUARE
pin_overall_length4.5000 INCHES NOMINAL IN
first_hole_diameter0.188 INCHES NOMINAL IN
pin_overall_diameter0.7500 INCHES NOMINAL IN
second_hole_diameter0.188 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes4.000 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.250 INCHES NOMINAL IN
NSN5315-00-424-5964
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DP1176 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 4.5000 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
MATERIAL: STEEL OVERALL
•
FIRST HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.7500 INCHES NOMINAL IN
•
SECOND HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 4.000 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH4.5000 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
MATERIALSTEEL OVERALL
FIRST HOLE DIAMETER0.188 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.7500 INCHES NOMINAL IN
SECOND HOLE DIAMETER0.188 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES4.000 INCHES NOMINAL IN
FIRST END STYLESQUARE
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
12053Interchangeable
interchangeable cross-reference
interchangeable
206LInterchangeable
interchangeable cross-reference
interchangeable
917-LH 3/8Interchangeable
interchangeable cross-reference
interchangeable
131-309-3Interchangeable
interchangeable cross-reference
interchangeable
ST293Interchangeable
interchangeable cross-reference
interchangeable
FIG472Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DP1176?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DP1176?
DP1176 is a PIN,STRAIGHT,HEADLESS.
What parts can replace DP1176?
There are 14 known substitutes for DP1176: 12053, 206L, 917-LH 3/8 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DP1176?
DP1176 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-424-5964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DP1176

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026