PartsTable
Technical Data Sheet
Download PDF

DP1000A — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DP1000A: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.075 INCHES NOMINAL IN, heat_treatment: AS FABRICATED, overall_height: 0.014 INCHES NOMINAL IN, outside_diameter: 0.150 INCHES NOMINAL IN, surface_treatment: CADMIUM OR PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-462-5228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DP1000A
NSN: 5310-00-462-5228
FSC: 5310 — Nuts and Washers
CAGE: K1334 — HADDON THOMAS AND STOKES LTD (GBR)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.075 INCHES NOMINAL IN
heat_treatmentAS FABRICATED
overall_height0.014 INCHES NOMINAL IN
outside_diameter0.150 INCHES NOMINAL IN
surface_treatmentCADMIUM OR PASSIVATE OVERALL
material_thickness0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
NSN5310-00-462-5228
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DP1000A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAT TREATMENT: AS FABRICATED
•
OUTSIDE DIAMETER: 0.150 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR PASSIVATE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.075 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.014 INCHES NOMINAL IN
HEAT TREATMENTAS FABRICATED
OUTSIDE DIAMETER0.150 INCHES NOMINAL IN
MATERIAL THICKNESS0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR PASSIVATE OVERALL
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.075 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
3326-1000-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LSE3665Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy DP1000A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DP1000A?
DP1000A is a WASHER,SPRING TENSION.
What parts can replace DP1000A?
There are 2 known substitutes for DP1000A: 3326-1000-001, LSE3665. Substitute compatibility should be verified for your specific system.
What is the NSN for DP1000A?
DP1000A is cataloged in the U.S. Government catalog under NSN 5310-00-462-5228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DP1000A