PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DP-812BLACK
DP-812BLACK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN, head_outside_diameter: 0.891 INCHES NOMINAL IN, hole_accommodation_diameter: 0.812 INCHES NOMINAL IN, material_accommodated_thickness: 0.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-118-2841, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DP-812BLACK
NSN: 5340-01-118-2841
FSC: 5340
CAGE: 28520 — HEYCO INC DBA HEYCO PRODUCTS (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
head_height0.062 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
head_outside_diameter0.891 INCHES NOMINAL IN
hole_accommodation_diameter0.812 INCHES NOMINAL IN
material_accommodated_thickness0.125 INCHES MAXIMUM IN
NSN5340-01-118-2841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DP-812BLACK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ACCOMMODATION DIAMETER: 0.812 INCHES NOMINAL IN
•
HEAD OUTSIDE DIAMETER: 0.891 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.125 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS (FLIS)
HOLE ACCOMMODATION DIAMETER0.812 INCHES NOMINAL IN
HEAD OUTSIDE DIAMETER0.891 INCHES NOMINAL IN
OVERALL HEIGHT0.406 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.125 INCHES MAXIMUM IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
2693Interchangeable
interchangeable cross-reference
interchangeable
10-02-693-02Interchangeable
interchangeable cross-reference
interchangeable
B1341SPR2693Interchangeable
interchangeable cross-reference
interchangeable
C108541Interchangeable
interchangeable cross-reference
interchangeable
C115045Interchangeable
interchangeable cross-reference
interchangeable
5507Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DP-812BLACK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DP-812BLACK?
DP-812BLACK is a BUTTON,PLUG.
What parts can replace DP-812BLACK?
There are 17 known substitutes for DP-812BLACK: 2693, 10-02-693-02, B1341SPR2693 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DP-812BLACK?
DP-812BLACK is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-118-2841. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DP-812BLACK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026