DOM — STANDOFF,THREADED,SPACING
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
DOM: STANDOFF,THREADED,SPACING.
The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.945 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN, diameter: 0.625 INCHES NOMINAL IN, material: STEEL OVERALL, style_designator: INTERNALLY THREADED FULL LENGTH, cross-sectional_shape: ROUND, material_document_and_classification: ASTM A512 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-416-6500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
DOM
NSN: 5340-01-416-6500 FSC: 5340 — Hardware, CommercialCAGE: 0NAG9 — LOWE MANUFACTURING CO., LLC DBA LOWE MANUFACTURING CO INC (USA)
SPECIFICATIONS
length 0.945 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN diameter 0.625 INCHES NOMINAL IN material STEEL OVERALL style_designator INTERNALLY THREADED FULL LENGTH cross-sectional_shape ROUND material_document_and_classification ASTM A512 ASSN STD SINGLE MATERIAL RESPONSE OVERALL NSN 5340-01-416-6500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: DOM
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• LENGTH: 0.945 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
• STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
• MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A512 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
• DIAMETER: 0.625 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS
LENGTH 0.945 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN STYLE DESIGNATOR INTERNALLY THREADED FULL LENGTH MATERIAL DOCUMENT AND CLASSIFICATION ASTM A512 ASSN STD SINGLE MATERIAL RESPONSE OVERALL DIAMETER 0.625 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE ROUND MATERIAL STEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
SUBSTITUTES & CROSS-REFERENCES 2
13230E3452 Same NSN cross-reference Same NSN cross-reference
Also cataloged under this NSN
UMHCP-1A Same NSN cross-reference Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM) No demilitarization required
Ready to buy DOM?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DOM?
DOM is a STANDOFF,THREADED,SPACING.
What parts can replace DOM?
There are 2 known substitutes for DOM: 13230E3452, UMHCP-1A. Substitute compatibility should be verified for your specific system.
What is the NSN for DOM?
DOM is cataloged in the U.S. Government catalog under NSN 5340-01-416-6500. This indicates validated use in U.S. government and defense supply chains.