DMT4P1 — CAPACITOR,FIXED,PLASTIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

DMT4P1: CAPACITOR,FIXED,PLASTIC DIELECTR.

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.840 INCHES MAXIMUM IN, body_height: 0.520 INCHES MAXIMUM IN, body_length: 0.800 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-222-7642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ DMT4P1

NSN: 5910-00-222-7642
NIINs: 002227642, 010279478
FSC: 5910 — Capacitors
CAGE: 93790 — CORNELL-DUBILIER ELECTRONICS, INC. (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.840 INCHES MAXIMUM IN
body_height	0.520 INCHES MAXIMUM IN
body_length	0.800 INCHES MAXIMUM IN
terminal_length	1.250 INCHES MINIMUM IN
terminal_diameter	0.032 INCHES NOMINAL IN
dielectric_material	PLASTIC POLYESTER
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
NSN	5910-00-222-7642

COMPONENT DIAGRAM

KEY FEATURES

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

BODY WIDTH: 0.906 INCHES NOMINAL IN

•

BODY HEIGHT: 0.500 INCHES NOMINAL IN

•

NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 400.0 DC SINGLE SECTION

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
BODY WIDTH	0.906 INCHES NOMINAL IN
BODY HEIGHT	0.500 INCHES NOMINAL IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	400.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
BODY LENGTH	0.750 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

DMF4P1Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

552118-104Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

520512001Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy DMT4P1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DMT4P1?

DMT4P1 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace DMT4P1?

There are 3 known substitutes for DMT4P1: DMF4P1, 552118-104, 520512001. Substitute compatibility should be verified for your specific system.

What is the NSN for DMT4P1?

DMT4P1 is cataloged in the U.S. Government catalog under NSN 5910-00-222-7642. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DMT4P1 — CAPACITOR,FIXED,PLASTIC DIELECTR

Request a Quote — DMT4P1