DMS 88097B — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

DMS 88097B: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_width: 2.000 INCHES NOMINAL IN, body_height: 1.125 INCHES NOMINAL IN, body_length: 0.937 INCHES NOMINAL IN, body_diameter: 0.267 INCHES NOMINAL IN, terminal_length: 1.625 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-065-8612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ DMS 88097B

NSN: 5910-00-065-8612
NIINs: 000658612, 000874208, 000875692, 001111991, 001479829, 002294475, 002322399, 004017752, 004661548, 005632419, 006812225, 007600184, 007827718, 008304908, 008394088, 008500548, 008509496, 008607707, 009034081, 009054033, 009342776, 009353435, 009459545, 009723855, 009789980, 009789985, 009975058, 009978067, 010211023, 010228983, 010514049, 012159033
FSC: 5910 — Capacitors
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)

SPECIFICATIONS

body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_width	2.000 INCHES NOMINAL IN
body_height	1.125 INCHES NOMINAL IN
body_length	0.937 INCHES NOMINAL IN
body_diameter	0.267 INCHES NOMINAL IN
terminal_length	1.625 INCHES MINIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.025 INCHES NOMINAL IN
dielectric_material	PLASTIC POLYSTYRENE
nominal_thread_size	0.216 INCHES IN
reliability_indicator	NOT ESTABLISHED
end_item_identification	5805-01-138-2751 FREQUENCY CONVE
NSN	5910-00-065-8612

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED MOUNTING HOLES

•

BODY STYLE: W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 2.125 INCHES NOMINAL IN

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 0.750 INCHES MAXIMUM IN

•

BODY WIDTH: 1.000 INCHES NOMINAL IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED MOUNTING HOLES
BODY STYLE	W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.125 INCHES NOMINAL IN
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	0.750 INCHES MAXIMUM IN
BODY WIDTH	1.000 INCHES NOMINAL IN
BODY HEIGHT	0.750 INCHES NOMINAL IN
UNTHREADED MOUNTING HOLE DIAMETER	0.188 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

MILC18312Reference document

Same NSN cross-reference

Reference document — Secondary reference

CH53B1MC205MReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-C-18312/4Reference document

Same NSN cross-reference

Reference document — Identification reference

CH53B1NC225KSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

M18312-04-0113Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy DMS 88097B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DMS 88097B?

DMS 88097B is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace DMS 88097B?

There are 5 known substitutes for DMS 88097B: MILC18312, CH53B1MC205M, MIL-C-18312/4 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for DMS 88097B?

DMS 88097B is cataloged in the U.S. Government catalog under NSN 5910-00-065-8612. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DMS 88097B — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — DMS 88097B