PartsTable
Technical Data Sheet
Download PDF

DMJT45J — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

DMJT45J: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 25.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-519-6596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DMJT45J
NSN: 3110-00-519-6596
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: K7182 — NSK UK LTD (GBR)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width25.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designator4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE
internal_clearance0.0026 INCHES MINIMUM RADIAL AND 0.0056 INCHES MAXIMUM RADIAL IN
overall_outside_diameter100.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-519-6596
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DMJT45J · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0026 INCHES MINIMUM RADIAL AND 0.0056 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: 4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 100.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0026 INCHES MINIMUM RADIAL AND 0.0056 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATOR4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE
OVERALL WIDTH25.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 3
9309UReference document
Same NSN cross-reference
Reference document — Secondary reference
454947Reference document
Same NSN cross-reference
Reference document — Secondary reference
D2-55000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy DMJT45J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DMJT45J?
DMJT45J is a BEARING,BALL,ANNULAR.
What parts can replace DMJT45J?
There are 3 known substitutes for DMJT45J: 9309U, 454947, D2-55000. Substitute compatibility should be verified for your specific system.
What is the NSN for DMJT45J?
DMJT45J is cataloged in the U.S. Government catalog under NSN 3110-00-519-6596. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DMJT45J