PartsTable
Technical Data Sheet
Download PDF

DMH6-14A1-501 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

DMH6-14A1-501: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.3750 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 3.4800 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-498-6953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DMH6-14A1-501
NSN: 3110-00-498-6953
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.3750 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
overall_length3.4800 INCHES NOMINAL IN
shank_diameter0.8750 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.9370 INCHES NOMINAL IN
outer_ring_width0.7600 INCHES NOMINAL IN
style_designatorSINGLE ROW, CONCAVE ROLLERS
thread_directionRIGHT-HAND
NSN3110-00-498-6953
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DMH6-14A1-501 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.8750 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.3270 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.7600 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.8750 INCHES NOMINAL IN
SHANK THREAD LENGTH1.3270 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.7600 INCHES NOMINAL IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
OVERALL LENGTH3.4800 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.7600 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
750838-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy DMH6-14A1-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DMH6-14A1-501?
DMH6-14A1-501 is a BEARING,ROLLER,ROD END.
What parts can replace DMH6-14A1-501?
There is 1 known substitute for DMH6-14A1-501: 750838-1. Substitute compatibility should be verified for your specific system.
What is the NSN for DMH6-14A1-501?
DMH6-14A1-501 is cataloged in the U.S. Government catalog under NSN 3110-00-498-6953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DMH6-14A1-501

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.