PartsTable
Technical Data Sheet
Download PDF

DMG0602 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DMG0602: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: STEEL, design_type: FRICTION, overall_diameter: 0.935 INCHES NOMINAL IN, special_features: STEEL IS PER QQ-S-637,1137 TO 1141; PHOSPHATE IS PER MIL-P-16232,CLASS 1,TYPE M OR Z; HEAT TREATMENT= COND. COLD DRAWN, surface_treatment: PHOSPHATE, end_item_identification: 1090-00-923-5971.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-921-5189, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DMG0602
NSN: 5340-00-921-5189
FSC: 5340 — Hardware, Commercial
CAGE: 1PN61 — DILLON AERO, INC. (USA)
SPECIFICATIONS
materialSTEEL
design_typeFRICTION
overall_diameter0.935 INCHES NOMINAL IN
special_featuresSTEEL IS PER QQ-S-637,1137 TO 1141; PHOSPHATE IS PER MIL-P-16232,CLASS 1,TYPE M OR Z; HEAT TREATMENT= COND. COLD DRAWN
surface_treatmentPHOSPHATE
end_item_identification1090-00-923-5971
opening_inside_diameter_for_which_designed0.795 INCHES NOMINAL IN
NSN5340-00-921-5189
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DMG0602 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.935 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.795 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.935 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.795 INCHES NOMINAL IN
SPECIAL FEATURESSTEEL IS PER QQ-S-637,1137 TO 1141; PHOSPHATE IS PER MIL-P-16232,CLASS 1,TYPE M OR Z; HEAT TREATMENT= COND. COLD DRAWN
SURFACE TREATMENTPHOSPHATE
END ITEM IDENTIFICATION1090-00-923-5971
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
F8199-000172Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DMG0602?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DMG0602?
DMG0602 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace DMG0602?
There is 1 known substitute for DMG0602: F8199-000172. Substitute compatibility should be verified for your specific system.
What is the NSN for DMG0602?
DMG0602 is cataloged in the U.S. Government catalog under NSN 5340-00-921-5189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DMG0602