PartsTable
Technical Data Sheet
DM15F751J0100WV1CR ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.310 INCHES MAXIMUM IN, body_height: 0.170 INCHES MAXIMUM IN, body_length: 0.450 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-400-5850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL DM15F751J0100WV1CR
NSN: 5910-00-400-5850
FSC: 5910
CAGE: 72136 — ELECTRO MOTIVE CORP SUBSIDIARY OF INTERNATIONAL ELECTRONICS CORP (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.310 INCHES MAXIMUM IN
body_height0.170 INCHES MAXIMUM IN
body_length0.450 INCHES MAXIMUM IN
terminal_length1.250 INCHES MINIMUM IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-5.00 TO 5.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
NSN5910-00-400-5850
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN DM15F751J0100WV1CR MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.110 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
INSULATION RESISTANCE AT REFERENCE TEMP: 100000.0 MEGOHMS
TERMINAL SURFACE TREATMENT: SOLDER
MATERIAL: PLASTIC CASE
QUALITY FACTOR AT REFERENCE TEMP: 2000.0000
BODY LENGTH: 0.450 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS: -0.0 TO 70.0 SINGLE SECTION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.110 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
INSULATION RESISTANCE AT REFERENCE TEMP100000.0 MEGOHMS
TERMINAL SURFACE TREATMENTSOLDER
MATERIALPLASTIC CASE
QUALITY FACTOR AT REFERENCE TEMP2000.0000
BODY LENGTH0.450 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS-0.0 TO 70.0 SINGLE SECTION
CAPACITANCE VALUE PER SECTION750.000 PICOFARADS SINGLE SECTION
BODY WIDTH0.310 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
173792Interchangeable
interchangeable cross-reference
interchangeable
91638540Interchangeable
interchangeable cross-reference
interchangeable
14X1,78-24B7Interchangeable
interchangeable cross-reference
interchangeable
2-015 N304-75Interchangeable
interchangeable cross-reference
interchangeable
2272-015Interchangeable
interchangeable cross-reference
interchangeable
20729006 REV L FN 9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DM15F751J0100WV1CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DM15F751J0100WV1CR?
DM15F751J0100WV1CR is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace DM15F751J0100WV1CR?
There are 7 known substitutes for DM15F751J0100WV1CR: 173792, 91638540, 14X1,78-24B7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DM15F751J0100WV1CR?
DM15F751J0100WV1CR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-400-5850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DM15F751J0100WV1CR