PartsTable
Technical Data Sheet
PartsTable / MRO / DM10CD390J04CR
DM10CD390J04CR ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.380 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, body_length: 0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-049-5675, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ DM10CD390J04CR
NSN: 5910-01-049-5675
FSC: 5910
CAGE: 72136 — ELECTRO MOTIVE CORP SUBSIDIARY OF INTERNATIONAL ELECTRONICS CORP (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.380 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
body_length0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
terminal_length1.000 INCHES MINIMUM IN
terminal_diameter0.016 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN5910-01-049-5675
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN DM10CD390J04CR MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.150 INCHES NOMINAL IN
•
BODY HEIGHT: 0.140 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
BODY LENGTH: 0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 10000.0 MEGOHMS
•
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS: -20.0 TO 100.0 SINGLE SECTION
•
TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.150 INCHES NOMINAL IN
BODY HEIGHT0.140 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
BODY LENGTH0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP10000.0 MEGOHMS
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 100.0 SINGLE SECTION
TERMINAL DIAMETER0.016 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
SPECIFICATION/STANDARD DATA81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
DM-10-050Interchangeable
interchangeable cross-reference
interchangeable
MRDM10C050D0500WV5CRInterchangeable
interchangeable cross-reference
interchangeable
CMRM04C050J03PInterchangeable
interchangeable cross-reference
interchangeable
10205-0424Interchangeable
interchangeable cross-reference
interchangeable
DM10-330JInterchangeable
interchangeable cross-reference
interchangeable
D105E330G0RInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DM10CD390J04CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DM10CD390J04CR?
DM10CD390J04CR is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace DM10CD390J04CR?
There are 30 known substitutes for DM10CD390J04CR: DM-10-050, MRDM10C050D0500WV5CR, CMRM04C050J03P and 27 more. Substitute compatibility should be verified for your specific system.
Is DM10CD390J04CR still available?
DM10CD390J04CR is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DM10CD390J04CR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026