PartsTable
Technical Data Sheet
Download PDF

DLH3830-054 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DLH3830-054: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL COMP 8740 OVERALL, nut_style: DOUBLE HEXAGON, thread_class: 2B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.345 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-004-6428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DLH3830-054
NSN: 5310-01-004-6428
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
nut_styleDOUBLE HEXAGON
thread_class2B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.345 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
locking_featureFREE-RUNNING ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
countersink_angle85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
surface_treatmentCADMIUM OVERALL
width_across_flats0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
NSN5310-01-004-6428
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DLH3830-054 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
•
WASHER THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.345 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
WASHER THICKNESS0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
395039Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DLH3830-054?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DLH3830-054?
DLH3830-054 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace DLH3830-054?
There is 1 known substitute for DLH3830-054: 395039. Substitute compatibility should be verified for your specific system.
What is the NSN for DLH3830-054?
DLH3830-054 is cataloged in the U.S. Government catalog under NSN 5310-01-004-6428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DLH3830-054

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.