PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DLG216W100810
DLG216W100810 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY OVERALL, leg_length: 2.114 INCHES NOMINAL THIRD END BULKHEAD IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A THIRD END BULKHEAD A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARELESS (TUBE) ALL ENDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-206-6151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DLG216W100810
NSN: 4730-01-206-6151
FSC: 4730
CAGE: 14798 — DESIGNED METAL CONNECTIONS INC DBA PERMASWAGE USA DIV PERMASWAGE, A PCC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OR ALUMINUM ALLOY OVERALL
leg_length2.114 INCHES NOMINAL THIRD END BULKHEAD IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A THIRD END BULKHEAD A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARELESS (TUBE) ALL ENDS
special_featuresANODIZED GOLD
surface_treatmentANODIZE OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.875 INCHES THIRD END BULKHEAD IN
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) THIRD END BULKHEAD
NSN4730-01-206-6151
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: DLG216W100810 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.750 INCHES SECOND END IN
•
LEG LENGTH: 1.173 INCHES MINIMUM AND 1.219 INCHES MAXIMUM SECOND END IN
•
SEAT ANGLE: 12.0 DEGREES ALL ENDS
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-367,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
CONNECTION STYLE: FLARELESS (TUBE) ALL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.750 INCHES SECOND END IN
LEG LENGTH1.173 INCHES MINIMUM AND 1.219 INCHES MAXIMUM SECOND END IN
SEAT ANGLE12.0 DEGREES ALL ENDS
SURFACE TREATMENTANODIZE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
CONNECTION STYLEFLARELESS (TUBE) ALL ENDS
SPECIAL FEATURESANODIZED GOLD
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) THIRD END BULKHEAD
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES SECOND END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
202275Interchangeable
interchangeable cross-reference
interchangeable
2-02275F080606Interchangeable
interchangeable cross-reference
interchangeable
US1120F080606Interchangeable
interchangeable cross-reference
interchangeable
DLG216F080606Interchangeable
interchangeable cross-reference
interchangeable
22-1352Interchangeable
interchangeable cross-reference
interchangeable
202260Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DLG216W100810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DLG216W100810?
DLG216W100810 is a RESISTOR,FIXED,COMPOSITION.
What parts can replace DLG216W100810?
There are 7 known substitutes for DLG216W100810: 202275, 2-02275F080606, US1120F080606 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DLG216W100810?
DLG216W100810 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-206-6151. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DLG216W100810

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026