PartsTable
Technical Data Sheet
Download PDF

DK-PN-10 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

DK-PN-10: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 2.3750 INCHES NOMINAL IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 1.0010 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN, body_outside_diameter: 1.2510 INCHES MINIMUM AND 1.2530 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-054-0877, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DK-PN-10
NSN: 3120-01-054-0877
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 72878 — GRANCO MANUFACTURING INC. DIV GRANCO PUMP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length2.3750 INCHES NOMINAL IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter1.0010 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN
body_outside_diameter1.2510 INCHES MINIMUM AND 1.2530 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED SPIRAL CIRCULAR
NSN3120-01-054-0877
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: DK-PN-10 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 1.2510 INCHES MINIMUM AND 1.2530 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 1.0010 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN
•
LUBRICANT ACCOMMODATION STYLE: GROOVED SPIRAL CIRCULAR
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER1.2510 INCHES MINIMUM AND 1.2530 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH2.3750 INCHES NOMINAL IN
BODY INSIDE DIAMETER1.0010 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN
LUBRICANT ACCOMMODATION STYLEGROOVED SPIRAL CIRCULAR
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
73230-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DK-PN-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DK-PN-10?
DK-PN-10 is a BEARING,SLEEVE.
What parts can replace DK-PN-10?
There is 1 known substitute for DK-PN-10: 73230-2. Substitute compatibility should be verified for your specific system.
What is the NSN for DK-PN-10?
DK-PN-10 is cataloged in the U.S. Government catalog under NSN 3120-01-054-0877. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DK-PN-10