PartsTable
Technical Data Sheet
Download PDF

DIN931-M24X70 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

DIN931-M24X70: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 15.0 MILLIMETERS NOMINAL MM, thread_length: 54.0 MILLIMETERS MINIMUM AND 70.0 MILLIMETERS MAXIMUM MM, fastener_length: 70.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND, width_between_flats: 36.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-334-2819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN931-M24X70
NSN: 5305-01-334-2819
FSC: 5305 — Screws
CAGE: 15526 — METRIC AND MULTISTANDARD COMPONENTS CORP (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height15.0 MILLIMETERS NOMINAL MM
thread_length54.0 MILLIMETERS MINIMUM AND 70.0 MILLIMETERS MAXIMUM MM
fastener_length70.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
width_between_flats36.0 MILLIMETERS NOMINAL MM
nominal_thread_diameter24.0 MILLIMETERS MM
thread_series_designatorM
thread_pitch_in_millimeters3.0
NSN5305-01-334-2819
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DIN931-M24X70 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 15.0 MILLIMETERS NOMINAL MM
•
FASTENER LENGTH: 70.0 MILLIMETERS NOMINAL MM
•
THREAD PITCH IN MILLIMETERS: 3.0
•
THREAD LENGTH: 54.0 MILLIMETERS MINIMUM AND 70.0 MILLIMETERS MAXIMUM MM
•
NOMINAL THREAD DIAMETER: 24.0 MILLIMETERS MM
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 36.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
HEAD HEIGHT15.0 MILLIMETERS NOMINAL MM
FASTENER LENGTH70.0 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS3.0
THREAD LENGTH54.0 MILLIMETERS MINIMUM AND 70.0 MILLIMETERS MAXIMUM MM
NOMINAL THREAD DIAMETER24.0 MILLIMETERS MM
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS36.0 MILLIMETERS NOMINAL MM
THREAD SERIES DESIGNATORM
SUBSTITUTES & CROSS-REFERENCES 1
179286Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DIN931-M24X70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN931-M24X70?
DIN931-M24X70 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace DIN931-M24X70?
There is 1 known substitute for DIN931-M24X70: 179286. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN931-M24X70?
DIN931-M24X70 is cataloged in the U.S. Government catalog under NSN 5305-01-334-2819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN931-M24X70

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.