PartsTable
Technical Data Sheet
Download PDF

DIN434-11 — WASHER,BEVEL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DIN434-11: WASHER,BEVEL.

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 11.5 MILLIMETERS NOMINAL MM, overall_width: 22.0 MILLIMETERS NOMINAL MM, major_thickness: 3.8 MILLIMETERS NOMINAL MM, minor_thickness: 2.0 MILLIMETERS NOMINAL MM, special_features: ROLLED GROOVES ON FACE OF WASHER TO DENOTE SLOPE. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-158-8306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN434-11
NSN: 5310-01-158-8306
FSC: 5310 — Nuts and Washers
CAGE: 1FH08 — LEHIGH ARMSTRONG INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter11.5 MILLIMETERS NOMINAL MM
overall_width22.0 MILLIMETERS NOMINAL MM
major_thickness3.8 MILLIMETERS NOMINAL MM
minor_thickness2.0 MILLIMETERS NOMINAL MM
special_featuresROLLED GROOVES ON FACE OF WASHER TO DENOTE SLOPE
style_designatorBEVEL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
flat_side_distance_between_thick_and_thin_edges22.0 MILLIMETERS NOMINAL MM
NSN5310-01-158-8306
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DIN434-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINOR THICKNESS: 2.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: BEVEL
•
MAJOR THICKNESS: 3.8 MILLIMETERS NOMINAL MM
•
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES: 22.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
MINOR THICKNESS2.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORBEVEL
OVERALL WIDTH22.0 MILLIMETERS NOMINAL MM
MAJOR THICKNESS3.8 MILLIMETERS NOMINAL MM
SPECIAL FEATURESROLLED GROOVES ON FACE OF WASHER TO DENOTE SLOPE
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES22.0 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALSTEEL OVERALL
HOLE DIAMETER11.5 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
M11 DIN434Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DIN434-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN434-11?
DIN434-11 is a WASHER,BEVEL.
What parts can replace DIN434-11?
There is 1 known substitute for DIN434-11: M11 DIN434. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN434-11?
DIN434-11 is cataloged in the U.S. Government catalog under NSN 5310-01-158-8306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN434-11