PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DIN1481-10X80
DIN1481-10X80 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 10.5 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM, overall_length: 80.0 MILLIMETERS NOMINAL MM, style_designator: SLOTTED, material_thickness: 2.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-338-0513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN1481-10X80
NSN: 5315-01-338-0513
FSC: 5315
CAGE: D8286 — DIN DEUTSCHES INSTITUT FUR NORMUNG EV (DEU)
SPECIFICATIONS
diameter10.5 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
overall_length80.0 MILLIMETERS NOMINAL MM
style_designatorSLOTTED
material_thickness2.0 MILLIMETERS NOMINAL MM
NSN5315-01-338-0513
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DIN1481-10X80 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 2.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: SLOTTED
•
DIAMETER: 10.5 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH80.0 MILLIMETERS NOMINAL MM
MATERIAL THICKNESS2.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSLOTTED
DIAMETER10.5 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
S0-C-62812Interchangeable
interchangeable cross-reference
interchangeable
GA51332Interchangeable
interchangeable cross-reference
interchangeable
7330-00-205-3093Interchangeable
interchangeable cross-reference
interchangeable
7418Interchangeable
interchangeable cross-reference
interchangeable
A-A-2824Interchangeable
interchangeable cross-reference
interchangeable
B48S25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DIN1481-10X80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN1481-10X80?
DIN1481-10X80 is a PIN,SPRING.
What parts can replace DIN1481-10X80?
There are 16 known substitutes for DIN1481-10X80: S0-C-62812, GA51332, 7330-00-205-3093 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN1481-10X80?
DIN1481-10X80 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-338-0513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN1481-10X80

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026